About the PDT50
The Digga PDT50 is a 2-speed hydraulic auger drive for 20 to 28 tonne excavators, built for pendulum drilling. It runs on 40 to 180 L/min and gives up to 40,061 Nm of torque @ 240 Bar, with augers up to 1,800 mm in earth and 1,500 mm in clay.
- High speed suits small augers, lifting spoil quickly and leaving a clean base. Switch to low speed and high torque to push large augers through compacted ground and rock.
- Two speeds let it carry a bigger reduction gearbox than a single-speed drive, so you keep high torque for most of the hole.
- HALO alignment comes standard, so the operator can see when the drive is plumb without a spotter.
- Cradle or double pin hitch, or no frame. 100 mm square output shaft for Digga 10 and 11 Series augers.
Warranty is 5 years on the gearbox and 3 years on the motor. Your machine needs a case drain line, and the 2-speed controller is sold separately. Tell us your machine make and model when you order, and we'll check it fits before anything is ordered.
Digga · Auger Drive
Digga PDT50 2-Speed Auger Drive
Digga PDT50 2-speed auger drive for 20 to 28 t excavators, HALO included. 40 to 180 L/min, 40,061 Nm @ 240 Bar. Free pickup QLD, NSW, VIC.
$20,988 inc GST
Digga code PDT50-7-EMC
- Buying guide: Choosing an auger drive
- Buying guide: Choosing a hitch
Your machine
We check it fits before anything is ordered.
Most of our range is ready to ship. Some items are made to order when demand is high, so we confirm your date by email before anything is ordered. Need it urgently? Call or text 0434 721 356.
Freight to your door
or free pickup
We don't recognise that postcode. Check it, or ask for a freight quote.
Freight is priced on your whole order. If you add other items, the freight at checkout may change.
If freight to you costs more, we'll contact you before finalising the order.
Or use your own freight company (BYO), free at checkout.
Free pickup from Digga in Yatala QLD, Wetherill Park NSW or Hallam VIC. Or free pickup from Digga in Yatala QLD, Wetherill Park NSW or Hallam VIC.
Build your drilling kit
Add augers and an extension to your PDT50
5% off augers and extensions bought with the drive
Your drive
Digga PDT50 2-Speed Auger Drive
Augers, up to 3
That's 3 augers, the most in one kit. Remove one to swap it.
Extension, optional
We don't list augers for this drive option yet. Tell us what you're drilling and we'll match them for you.
Specifications
Shaded rows change with the option you pick. Figures from Digga.
Suits
- Machine weight: 20,000 to 28,000 kg
- Flow: 40 to 180 L/min
- Max pressure: 240 bar @ 150 L/min
- Case drain: Required
Before you order: tell us your machine make and model and your coupler type. We check it fits before anything is ordered.
Warranty
5 years gearbox, 3 years motor (Digga).
Suits
- Machine weight: 20,000 to 28,000 kg
- Flow: 40 to 180 L/min
- Max pressure: 240 bar @ 150 L/min
- Case drain: Required
Specifications
About the PDT50
The Digga PDT50 is a 2-speed hydraulic auger drive for 20 to 28 tonne excavators, built for pendulum drilling. It runs on 40 to 180 L/min and gives up to 40,061 Nm of torque @ 240 Bar, with augers up to 1,800 mm in earth and 1,500 mm in clay.
- High speed suits small augers, lifting spoil quickly and leaving a clean base. Switch to low speed and high torque to push large augers through compacted ground and rock.
- Two speeds let it carry a bigger reduction gearbox than a single-speed drive, so you keep high torque for most of the hole.
- HALO alignment comes standard, so the operator can see when the drive is plumb without a spotter.
- Cradle or double pin hitch, or no frame. 100 mm square output shaft for Digga 10 and 11 Series augers.
Warranty is 5 years on the gearbox and 3 years on the motor. Your machine needs a case drain line, and the 2-speed controller is sold separately. Tell us your machine make and model when you order, and we'll check it fits before anything is ordered.