Skip to product information
Digga PDT12 2-Speed Auger Drive

About the PDT12

The Digga PDT12 is a 2-speed hydraulic auger drive for high flow excavators of 6 to 15 tonnes. It runs on 40 to 180 L/min and gives up to 11,646 Nm of torque @ 240 Bar, with augers up to 1,600 mm in earth and 1,200 mm in clay.

  • Two speeds: high speed for smaller holes, and a slower, higher-torque speed for bigger ones.
  • Choose a cradle or double pin hitch, or no frame. Packages come with hoses, couplers and linkage.
  • 75 mm square output shaft for Digga 8 Series augers. HALO alignment is available.
  • Your machine needs a case drain line. A 3 m power lead and 2-pin connector run the speed change, and the 2-speed controller is sold separately.

Warranty is 5 years on the gearbox and 3 years on the motor. Add your machine make and model to your order, and we'll confirm it suits before it ships.

Digga · Auger Drive

Digga PDT12 2-Speed Auger Drive

Digga PDT12 2-speed high flow auger drive for excavators of 6 to 15 t. 40 to 180 L/min, 11,646 Nm @ 240 Bar, 8 Series augers. Free pickup QLD, NSW, VIC.

$13,904 inc GST

Digga code PDT12-5-EMC

Machines 6 to 15t40 to 180 L/min11,646 Nm @ 240 BarCase drain required
Hitch
Alignment

HALO alignment

HALO is a ring of LED lights in the drive's hood. All green means the auger is plumb. If it drifts, red and green lights guide you back.

No spotter or spirit level needed, straighter holes, less concrete, and less side load on the drive and auger.

Standard is the same drive without HALO. You can add a HALO retrofit kit later.

HALO and swing control explained

Your machine

We confirm it suits your machine before it ships.

Most of our range is ready to ship. Some items are made to order when demand is high, so we confirm your date by email before anything is ordered. Need it urgently? Call or text 0434 721 356.

Freight to your door

or free pickup

Free pickup from Digga in Yatala QLD, Wetherill Park NSW or Hallam VIC. Or free pickup from Digga in Yatala QLD, Wetherill Park NSW or Hallam VIC.

Not sure it fits? Call or text 0434 721 356

Build your drilling kit

Add augers and an extension to your PDT12

5% off augers and extensions bought with the drive

Your drive

Digga PDT12 2-Speed Auger Drive

Augers, up to 3

Earth, rock or tungsten: which auger?

Extension, optional

Specifications

Drive model PDT12
Maximum torque 11,646 Nm @ 240 Bar (theoretical)
Hydraulic flow 40 to 180 L/min
Maximum flow 180 L/min
Maximum pressure 240 bar
Maximum power 60 kW
Largest auger 1,600 mm earth, 1,200 mm clay, 1,000 mm rock
Takes augers Digga 8 Series
Output shaft (this option) 75mm Square
Hitch (this option) Cradle hitch
Package (this option) Standard
Alignment (this option) Standard
Motor (this option) Geroler (two-speed)
Drive body diameter 340 mm
Pressure relief valve Included
Energy control valve Optional
Pressure relief valve fitted (this option) Yes
Overall length 952 mm

Shaded rows change with the option you pick. Figures from Digga.

Suits

  • Excavator
  • Machine weight: 6,000 to 15,000 kg
  • Flow: 40 to 180 L/min
  • Max pressure: 240 bar @ 150 L/min
  • Case drain: Required

Add your machine make and model and your coupler type to your order. We confirm it suits before it ships.

Warranty

5 years gearbox, 3 years motor (Digga).

Suits
  • Excavator
  • Machine weight: 6,000 to 15,000 kg
  • Flow: 40 to 180 L/min
  • Max pressure: 240 bar @ 150 L/min
  • Case drain: Required
Specifications
Drive model PDT12
Maximum torque 11,646 Nm @ 240 Bar (theoretical)
Hydraulic flow 40 to 180 L/min
Maximum flow 180 L/min
Maximum pressure 240 bar
Maximum power 60 kW
Largest auger 1,600 mm earth, 1,200 mm clay, 1,000 mm rock
Takes augers Digga 8 Series
Output shaft (this option) 75mm Square
Hitch (this option) Cradle hitch
Package (this option) Standard
Alignment (this option) Standard
Motor (this option) Geroler (two-speed)
Drive body diameter 340 mm
Pressure relief valve Included
Energy control valve Optional
Pressure relief valve fitted (this option) Yes
Overall length 952 mm
About the PDT12

The Digga PDT12 is a 2-speed hydraulic auger drive for high flow excavators of 6 to 15 tonnes. It runs on 40 to 180 L/min and gives up to 11,646 Nm of torque @ 240 Bar, with augers up to 1,600 mm in earth and 1,200 mm in clay.

  • Two speeds: high speed for smaller holes, and a slower, higher-torque speed for bigger ones.
  • Choose a cradle or double pin hitch, or no frame. Packages come with hoses, couplers and linkage.
  • 75 mm square output shaft for Digga 8 Series augers. HALO alignment is available.
  • Your machine needs a case drain line. A 3 m power lead and 2-pin connector run the speed change, and the 2-speed controller is sold separately.

Warranty is 5 years on the gearbox and 3 years on the motor. Add your machine make and model to your order, and we'll confirm it suits before it ships.

Warranty 5 years gearbox, 3 years motor
Spec sheet and videos